280W Pearl Drilling Machine 0-15000rpm Pearl Punching Machine Pearl Drilling Kit Bead Drill for Jewelry Making Bead Polishing Machine Full Set for 5-35mm Coral Shell Amber Stone

DetailsBead Holder: This accessory enables the drilling machine to drill holes without regular cleaning of pearl powder chips, so as to ensure the long-term normal use of the drilling machine.Needle Chuck: The product is equipped with twist needles of different sizes, with diameters of 0.02inch, 0.03inch, 0.02inch, 0.04inch, and 0.047inch respectively. When punching, you need to insert the needle slowly to avoid twisting the needle or breaking the bead.Anti-slip Foot Mats: The drilling machine is equipped with a stable base with four foot mats made of cast iron, which can play the role of anti-slip and make the drilling machine run more stably, so your jewelry will not be damaged due to misoperation.How to Install1. Install the depth regulator2. Install the auxiliary handle.3. Install the clamp.4. Install the plastic round handles on both sides and adjust the spacing between the clamps.5. Install the bottom dust hole.6. Plug in the voltage and adjust the distance.SpecificationsColor: Black+ Yellow+GreenModel: KYDOverall Material: AluminumMaterial of Foot Mat: Cast IronMaterial of Motor: Pure CopperMaterial of Collets and Drill Bit: Plastic and CopperType: Jewelry ToolsPlug Type: US StandardVoltage: 110VPower: 280WSpeed: 0-15000 rpmSuitable Diameter of Jewelry: 5-35mm/0.2-1.38inchDiameter of Needles: 0.5mm/0.02inch, 0.8mm/0.03inch, 0.6mm/0.02inch, 1mm/0.04inch, 1.2mm/0.047inchClamping Range: 0.3-4mm/0.012-0.16inchGross Weight: 4.85kg/10.69lbsNet Weight: 4.5kg/9.9lbsProduct Size: 23.5cm*10cm*11cm/9*3.9*4.3inchPackage Size: 30*20*20cm/11.8*11.8*7.87inchPackage Included1 * Pearl Drilling Machine 1 * Pedal Switch1* Bilingual Instructions(English+Chinese)1* Tool BoxAll Accessories for UseNotes1. Please strictly follow the instructions when you use this product.2. Please tighten everything, including your pearl and needle!3. Make sure that the drill bit has been tightened with T-lock and is in the center position.4. You can use a very small stream of water to prevent cracking, and prevent the drill from being destroyed.5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• 【High Efficiency】: The drilling machine uses a 280w pure copper motor, which consumes less energy, has a small resistance, and can rotate at 15000rpm. It can complete the drilling operation in a short time, so you don’t have to wait for a long time.
• 【Adjustable Design】: The drilling machine is equipped with a stepless speed regulation switch and depth adjuster for targeted drilling according to different jewelry to provide you with more refined pearls.
• 【Multiple Sizes】: The package includes 15 sets of special collets and drill bits made of plastic and copper, which can be used to drill most pearls without damaging them, and the fixing effect is good, fully meeting your needs.
• 【Simple Operation】: The drilling machine is equipped with a power auxiliary handle device and a pedal switch. You just need to place the pearl on the installed machine and then operate it through the handle and pedal switch without tedious steps, allowing you to focus on the drilling and create perfect crafts.
• 【Application】：The drilling machine is applicable to natural or synthetic jewelry with a diameter of 3-35mm/0.12-1.38inch, such as freshwater pearls, seawater pearls, South China Sea pearls, Tahiti black pearls, pearl oysters, coral, amber, gold, silver, copper and other accessories. At the same time, the product can also be widely used in jewelry stores, jewelry manufacturers, etc.