5/16 X 3/8 X 2-1/2" 4 FLUTE M42 COBALT FINE-PITCH ROUGHING END MILL (5826-0312)
Produktdetails
| Artikelnummer | 238417959 | Erscheinungsdatum | 2026/07/11 | Listenpreis | €9.70 | Modellnummer | 238417959 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
5/16 X 3/8 X 3/4 X 2-1/2" 4 Flute M42 Cobalt Fine-Pitch Roughing End Mill ~ Cutting diameter is 5/16". ~ Shank diameter is 3/8". ~ Cutting length is 3/4". ~ Overall length is 2-1/2". ~ Ground From Solid M42 Blank. ~ 8% cobalt. ~ Center cutting. ~ Low co-efficient friction. ~ The pressure of the cut is distributed over many teeth. ~ Recommended for high production milling in difficult-to-machine materials such as inconel, hasteloy, titanium alloys and other materials up to RC 40. ~ With a Weldon flat, a flat section on the tool shank, used to hold the tool in place by set screws within the body of the holder.
- Ground From Solid M42 Blank.
- 8% cobalt.
- Center cutting.
- Recommended for high production milling in difficult-to-machine materials such as inconel, hasteloy, titanium alloys and other materials up to RC 40.
- The pressure of the cut is distributed over many teeth.
| Cutting edge material | Cobalt |
|---|---|
| Size | 5/16 in |
| Drill bit & set type | Drill Bits |
| Brand | HHIP |
| Material | Cobalt |
| Model | 5826-0312 |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
KorrekturanfrageKundenbewertungen
Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.