ALadrs Resin 3D Printer Flex Building Plate,231x131mm Spring Steel Flexible Plate and Magnetic Base Platform for Creality Halot Mage, Mage Pro LCD 1pcs
€9.60
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€9.60
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details
Produktdetails
| Artikelnummer | 221608437 | Erscheinungsdatum | 2026/05/03 | Listenpreis | €9.60 | Modellnummer | 221608437 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- Applicable model: 231x131 mm is made for Creality Halot Mage, Mage Pro.This resin magnetic flexible steel plate flex bed is also can used for the plate 's size which is longth between 231-241 mm,the width between 131-141 mm.
- High durability:Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
- Easy to operate: Traditional DLP light-curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending. Easier removal of printed models from the resin build surface. Makes it easier to remove prints and avoid damage in the process, especially for small prints.
- Clever design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
- Installation method: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat it, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print (A4) 3.8mm thick spacers to facilitate the normal zeroing of the Z axis.
| Item Weight | 0.634 ounces |
|---|---|
| Manufacturer | Aladrs |
| Item model number | ALA-3D-047 |
| Package Dimensions | 9.84 x 6.18 x 0.35 inches |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage