Car Thermostat Water Neck Housing Gasket, 1/8" Aluminum Carrier Silicone Engine Coolant Thermost Housing Seal, Auto Engine Coolant Outlet Gaske Replacement, Compatible with SBC BBC

★★★★★ 4.1 80 Bewertungen

€4.80
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€4.80
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 24.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 233678291 Erscheinungsdatum 2026/06/27 Listenpreis €4.80 Modellnummer 233678291
Kategorie
  • High Quality Material: This product is made from two materials: aluminum and silicone. The aluminum is hard and offers excellent structural stability, maintaining the gasket's overall flatness and rigidity, and resisting deformation during installation and use. The silicone is soft and features good elasticity and flexibility, allowing it to adapt to subtle changes in the contact surface.
  • Application: This product has an inner diameter of 1.88 inches and an overall width of 4.1 inches. It is suitable for SBC and BBC engines and is compatible with a wide range of vehicle models, including engines with displacements of 265, 283, 305, 327, 350, 383, 396, 400, 427, 454, 472, and 500 cubic inches.
  • Easy Installation: First, turn off the vehicle's engine and wait for it to cool completely to room temperature. Align this gasket with the mounting holes on the housing and place it gently. Adjust the gasket's position so that it is perfectly aligned with the contact surfaces of the housing and the engine block. After confirming that the holes are properly aligned, slowly reinstall the thermostat housing and evenly tighten the mounting bolts.
  • Prevents Leaks: This product effectively prevents coolant leaks. When installed between the thermostat housing and the engine block, the silicone sealing layer tightly adheres to both contact surfaces under installation pressure, filling microscopic gaps and preventing coolant from seeping out. The seal also prevents air from entering the coolant circulation system.
  • Reusable: This product offers excellent reusability. It does not need to be discarded after routine maintenance and disassembly. The overall structure is resistant to damage and deformation, allowing it to be reused for subsequent installations after disassembly. As long as the product remains intact with no visible damage, it can be stored for future use and will maintain good performance even after multiple installation cycles.

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.1 von 5
★★★★★
80 Bewertungen | 33 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
77% (62)
4 Sterne
7% (6)
3 Sterne
4% (3)
2 Sterne
2% (2)
1 Stern
10% (8)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.