CAT40 1/8 x 2.5" End Mill Tool Holder Balanced G2.5 20000 RPM for CNC Milling US

★★★★★ 5.0 99 Bewertungen

€12.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€12.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 22.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 221068773 Erscheinungsdatum 2026/05/03 Listenpreis €12.00 Modellnummer 221068773
Kategorie

Description:For CNC Milling1 x CAT40 1/8 x 2.5" End Mill Tool Holder Material: 40CR Bore Diameter: 1/8" Max RPM Balanced To: G2.5 20000 RPMTIR (Inch): 0.0001” Drawbar Thread Size: 5/8“-11 Noes Diameter: 0.75"Feature: Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish. Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole. And when the holder is placed into the balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation. All critical surface are precision ground Internal bore concentricity is less than 0.0001" from taper to end mill pocket Flange and V-groove are precision ground to ensure reliable tool change Coolant thru spindle capability

  • For CNC Milling. Material: 40CR, Bore Diameter: 1/8", Max RPM Balanced To: G2.5 20000 RPM, TIR (Inch): 0.0001”, Drawbar Thread Size: 5/8“-11, Noes Diameter: 0.75"
  • Package Include:1 x CAT40 1/8 x 2.5" End Mill Tool Holder
  • Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
  • Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
  • All critical surface are precision ground Internal bore concentricity is less than 0.0001" from taper to end mill pocket. Flange and V-groove are precision ground to ensure reliable tool change.
UPC 732694105159
Brand Name Mingdun
Unit Count 1.0 Count
Part Number AM-MINGMQ0456
Manufacturer Mingdun
Material Type Alloy Steel
Number of Items 1
Compatible Material Steel, Stainless Steel, Aluminum, Brass, Copper, Cast Iron, Titanium, Plastic, Wood, Glass, Stone, Composite

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

5 von 5
★★★★★
99 Bewertungen | 41 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
90% (89)
4 Sterne
0% (0)
3 Sterne
0% (0)
2 Sterne
0% (0)
1 Stern
10% (10)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.