Chicago Latrobe 110X High-Speed Steel Extra Long Length Drill Bit, Black Oxide Finish, Morse Taper Shank, 118 Degree Notched Point, 47/64" Size

★★★★★ 4.8 116 Bewertungen

€46.95
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€46.95
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 21.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 221869269 Erscheinungsdatum 2026/05/04 Listenpreis €46.95 Modellnummer 221869269
Kategorie

The Chicago-Latrobe 110X series extra-long length drill bit is made from high-speed steel with a black oxide finish and has a 118-degree notched point for use in extra-deep drilling applications on ferrous materials. High-speed steel (HSS) provides hardness for wear resistance, and the black oxide finish acts as a lubricant to reduce wear while promoting chip and coolant flow. Compared to standard drill bits, this tool has a thicker web for increased strength and rigidity. The drill bit's web thins at the tip to create a 118-degree notched point, which penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge longer than a split point. An extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit because it has longer flutes and overall length. The #2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit. Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach for the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less prone to deflection when drilling. Short length twist drill bits (also called stub or screw-machine length) are the shortest and stiffest twist drill bits, helping to reduce the chance of deflection or breakage when drilling. Reduced shank twist drill bits (also called Silver and Deming drill bits) have a shank that is smaller in diameter than its shaft, permitting drilling machines with a 1/4", 1/2", or 3/4" drill chuck to create large holes. Long length twist drill bits (also called taper length) are a little longer than jobber length, allowing for deeper holes and longer reach. Extra-long length twist drill bits (also called extension) are longer than long length twist drill bits for greater reach or for drilling deeper holes.Chicago-Latrobe manufactures drill bits and accessories, reamers, countersinks, and blanks. The company, founded in 1890 and headquartered in Clemson, SC, meets International Organization for Standardization (ISO) standard 9001.

  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • High-speed steel (HSS) provides hardness for wear resistance
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge
  • #2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit
UPC 662355514399
Model 51439
Brand Name Greenfield
Shank Type Taper
Unit Count 1.0 Count
Part Number 51439
Finish Types Black Oxide
Manufacturer Greenfield
Material Type High Speed Steel (HSS)
Tool Flute Type Spiral
Cutting Diameter 0.73 Inches
Cutting Angle String 118 Degrees
Surface Recommendation Metals,Stainless Steel,Steel
Global Trade Identification Number 00662355514399

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.8 von 5
★★★★★
116 Bewertungen | 48 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
87% (101)
4 Sterne
2% (2)
3 Sterne
1% (1)
2 Sterne
0% (0)
1 Stern
10% (12)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.