Digital LCR Meter Tester 10HZ to 300kHz Frequency Source Resistance 30Ω 50Ω 100Ω with Fully Automatic Test

The meter include all the accessories. Specification: Parameters：Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,Rs-Q,R-X,Z-θrad,Z-θdeg Monitor Parameters：Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ% Accuracy：0.05% ±5 Frequency：10Hz～300kHz Display Range：L: 0.00001μH - 999999H C: 0.00001pF - 999999μF R,Z: 0.00001Ω - 99.9999MΩ D,Q: 0.00001 - 999999 θ(deg): -90.0000°- 90.0000° θ(rad): -3.14159 – 3.14159 Δ%: -999.999% - 999.999% Source Resistance：30Ω 50Ω 100Ω Range：Automatic, Manual, and nominal, 9 ranges Display Max：6 digital, principle parameter: 999999; sub parameter:999999; monitor parameter: 999999 Signal Level：0.01V - 2.00V (10mV Step) Speed：30t/s, 10t/s, 6 t/s, 3 t/s 1-256 times average is available Comparator：14-bin sorting, 10-bin GD, 1-bin NG, 1-bin AUX, 2-bin principle parameter NG; Count Function: Max - 999999 List Test：10 group frequency and level scanning measurement Adjustment：Open & Short circuit sweep frequency reset, 3 point frequency reset and load calibration. Files：10 group files to save user's setting, 1 group to save system data real-time Interface： RS232C, ExHandler interface, standard configuration USB Disc interface (article 10000 data) LCR Automatic selection, keypad lock, SCPI instruction set, true-color TFT-LCD Display Voltage: 90V AC - 250V AC Frequency: 50Hz - 60Hz Max Power: 20VA 264mm (width)x107mm(height)x350mm(depth) 4kg Standard accessories: 1)ATS2818 Data Acquisition Software 2)ATL501A Kelvin Test Clip 3)ATL601 Test Fixture 4)ATL600 Short Circuit Stake 5)ATL508A SMD Patch Clip 6)ATL608 SMD Patch Cable Test Fixture 7)ATL508 SMD Patch Test Clip 8)ATL108 RS232 Communication Cable 9)Interface: USB-Disk and USB-232 Comparator Function: 10 files,14 bins: P1~P9,NG,AUX, HI, IN, LO 10)Interface: RS232C and Handler

• ★ TFT-LCD Display Measurement Terminal: 5 terminals
• ★ Correction: OPEN and SHORT Test signal monitor: Vm and Im Avarage rate: 1~200times
• ★ Optional Interface: USB-Disk and USB-232 Comparator Function: 10 files,14 bins: P1~P9,NG,AUX, HI, IN, LO
• ★Interface: RS232C and Handler AT2818 adopts true-color TFT-LCD and English operation interface (Chinese is also available). AT2818 (Rev B2.0) has been upgraded into continuous frequency with the resolution of 0.001Hz. Key lock function
• ★Four parameters can be measured at the same time by AT2818, any parameters can be set arbitrarily. Both main & sub parameters can be displayed in 6 dgt after the improvement. AT2818 can not only scan 10 kinds of frequency or voltage level, but also correct three groups of user frequency so as to improve the accuracy.