Electric Oil Extractor Pump Kit 12V 60W Scavenge Exchange Transfer Pump for Auto Marine Boat Diesel Car Motorbike

Attention: Only oil, transmission oil, lubricating oil, and other non corrosive liquids can be extracted➤Specification:100% brand new and high qualityMaterial: Metal + PlasticColor: BlackRated Voltage: DC 12VRated Power: 60WMaximum Flow: 1.3GPMMaximum Pressure: 0.8MPAPump Diameter: Approx. 5 cm / 1.97"Length: Approx. 16cm / 6.3"Cable Length: Approx. 60cm / 23.62’’Clips Length: Approx. 8cm / 3.15"Outlet PVC pipe Length:150cm/ 59’’Nylon pipe Length:100cm/ 39.37’’uantity: 1 pcPackage size: 8’’*5.5’’*4.3’’Package weight: 2lb➤Features: How to use: Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oilConnect the pump to the power, run it for a while, and observe whether the inlet and outlet is normalOpen the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not moveThen put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely)As no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets cleanIf you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out➤What is included: 1x Oil Pump 1x 0.43’’ Outlet PVC pipe 1x0.24’’ Nylon pipe

• ➤PERFECT DESIGN - Oil liquid suction pump extractor, small size, easy to carry and storage. The weight of this pump is only 2 lbs. Due to its compact size and the handle grip, this oil pump is very portable to carry. You can freely use it wherever you want to use. This oil transfer extractor pump with self-priming, rotating vane pump with an on/off switch and an inner bypass valve ensures reliable operation every time.
• ➤WIDE APPLICATION - Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
• ➤EASY TO USE - Oil Transfer Extractor Pump with self-priming, rotating vane pump with an on/off switch and an inner bypass valve ensures reliable operation every time, very easy to use.
• ➤POWERFUL MOTOR - Electric oil extractor pump works by connecting the clamps to the 12V car-battery. This transfer pump ideal for filling diesel powered vehicles or engines at your garage or repair shop. Maximum pressure is 0.8MPA, maximum flow is 1.3gpm, rated power is 60W, rated voltage is DC 12V.
• ➤FUNCTION - This engine oil pump is used to transfer oil, diesel, and other liquids, it works by connecting the clamps to the 12V car battery, the power switch simple, easy to operate. It is an ideal equipment for quick and clean oil-changes.
• ➤Attention - Only oil, transmission oil, lubricating oil, and other non corrosive liquids can be extracted.