Eujgoov Phase Sequence Tester AC70-1000V, 1000C Non Touch Phase Rotation Tester Meter 5.4kVrms

Specification: Item Type: Phase Sequence Tester Material: ABS Power Source: DC3V 2 x AA dry batteries (not included) Live Voltage Range: AC 70-1000V, 45/65Hz (sine waveform continous input) Clamp Wire Size: Outer Diameter Approx. 1.6-16mm / 0.06-0.63in LED Display: Positive Phase: 4 phase check lights light up clockwise Reverse Phase: 4 phase check lights light up counterclockwise Live: L1, L2, L3 lights up within voltage setting range Missing Phase: L1 or L2 or L3 light does not light up Breakpoint: L1 or L2 or L3 light does not light up Buzzer: Positive Phase: Intermittent short beep Reverse Phase: Continuous long beep Battery Check: POWER indicator light turns on after power on; LOW BATTERY light turns on when battery is low Magnet: Four magnets on the back of the meter, can be hung on the distribution box, can bear 800g mass Auto Power Off: Automatically shuts off approximately 5 minutes after turning on Meter Size (WxHxT): Approx. 70x75x30mm / 2.76x2.95x1.18in Clamp Wire Length: Approx. 0.6m / 23.6in Working Temperature Humidity: -10℃ to 55℃; below 80%rh Storage Temperature Humidity: -20℃ to 60℃; below 90%rh Maximum Voltage Measurement: AC1000V Insulation Strength: 5.4kVrms Maximum Rated Power: 300mVA Suitable Safety Standards: EN61010-1:2001, EN61010-031:2002, Pollution Degree 2, CAT Ⅲ (600V), Transient Overvoltage 6000V How to Use: Remove the product and directly use. packing list: 1 x Phase Sequence Tester 1 x User Manual 1 x Storage Bag

• [Multi Function] This tester supports 3 phase sequence detection (positive phase, reverse phase, phase loss), live wire detection, simple electrical inspection, live wire recognition, phase loss judgment, breakpoint locating, line inspection, etc.
• [Non Touch Measurement] Simply clamp the superconducting high insulation clamp onto the insulation sheath of the live wire to safely check the phase sequence, without touching the high voltage bare wire.
• [Wide Range] The phase sequence detector can measure voltage from AC 70V to 1000V and features a large jaw capable of clamping wires from 1.6mm to 16mm.
• [Sound and Light Indicator] The phase rotation meter features beep prompts and LED indicator lights for easy understanding of electrical conditions.
• [Magnetic Adsorption] The phase rotation tester features magnet, allowing for easy attachment to metal plate of equipment, making it convenient to operate.