Generic Maxitrol 5 Psi - 325-5L48 34inch x 34inch - Aluminum (325L - Series) Line Pressure Regulators Suitable for Natural, Mixed Gases, liquefied Petroleum Gases, and LP Gas-air mixtures

325-L SERIES Lever Acting Design with OPDs for 5 psi Piping Systems Maxitrol s 325-L Series line pressure regulators with OPDs are for use on piping systems up to 5 psi. The regulator reduces pounds pressure to a level within the appliance or equipment s operating supply range. The line regulator is located upstream of equipment already fitted with an appliance regulator. All models with the exception of 325-7AL210D and 325-9L210E are suitable for multi-positional mounting. 325-7AL210D and 325-9L210E are to be mounted in a horizontal upright position only. If ball check vent limiting device is installed, mount in an upright position only. NOTE: Line pressure regulators with separate overpressure protection devices are factory preassembled and supplied to the field as a unit. All Maxitrol gas pressure regulators should be installed and operated in accordance with Maxitrol Safety Warning Instructions Imblue Technology : All models may be ordered with Imblue Technology . Imblue Technology increases corrosion resistance and provides extra protection against the elements for regulators used in outdoor applications.

• Certification: ANSI Z21.80/CSA 6.22 Line Pressure Regulators
• Gas types: Suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures
• Rated Inlet Pressure: 5 psi (34.5 kPa)/ Maxitrol Tested: 10 psi (69 kPa) [With 12A09, 12A39, or 12A49 Vent Limiter Installed Natural: 5 psi (34.5 kPa); LP: 2 psi (13.8 kPa)]
• Maximum Individual Load/ Capacity: (w/OPD 48 attached) 320,000 Btu/h
• Ambient Temperature Ranges: -40 to 205°F (-40 to 96°C)