LED dimmer 12V 5V 24V 36V 8A PWM Switch with 2.4G Brightness Adjustment Touch Remote Control, Suitable for Single Color LED Light Strip V1(Push Switch Only)

Dimmersfeature:Remote control or connect external push button switch for on/off and dimming functionsUltra-sensitive brightness adjustment touch slideDimming, smooth switching, no flickeringAutomatic transmission function: the controller automatically transmits signals to another controller with a control distance of 30mSynchronize across multiple controllersThere are magnets on the back so it can easily stick to the back stand or any metal Matching remote control:The end user must pair the remote control with the receiver before use. The steps are as follows:*** Matches:Short press the matching button and immediately press the remote control's power button.*** delete:Press and hold the match key for 5 seconds to delete all matches,The light flashes 5 times to indicate all matching remote controlshas been deleted.The main function:One V1 receiver can control up to 10 remote controls within a distance of 30mAutomatic launch:One receiver can transmit the signal of the remote control to another receiver within 30m range,As long as there is a receiver within 30m, the remote control distance can be unlimited.Automatic synchronization:Multiple receivers can work synchronously when controlled within a distance of 30mvia the same remote control.Receiver placement provides communication distance up to 30m. However, we recommend for indoor applicationsThe distance between receivers should not exceed 15m.V1 (receiver) and R11 (sender):* To extend battery life, the touch slider will enter sleep mode after 20 seconds of no operation.* If the light is on, press and hold the on/off key for more than 1 second, then touch to slide to dim.* If the light is off, short press the on/off key to turn on the light, then touch the slider to dim.***Note: For safety reasons during transportation, batteries are not included, I hope you understand

• Dimmers