Rust-Oleum 2524-838 Professional Inverted Marking Paint Spray, Caution Blue

Rust-Oleum Professional Inverted Marking Paint Spray marks gravel, soil, grass, concrete and blacktop. Use to mark athletic fields, landscaping, work sites and more. Includes a no-mess spray-through cap to allow upside-down use.

An aerosol coating specifically packaged for use in an inverted position as a marking paint. Use for marking construction and excavation sites, underground utilities and for traffic safety. They can also be used with #2393000 Marking Wand to make large jobs less tedious. They feature fast dry and adhesion to concrete, blacktop, gravel, soil and grass.

Highlights:

• Size: 15 Oz.
• Color: Caution Blue
• Indoor/Outdoor.
• Fast-drying.
• Withstands short-term weathering.
• Marks gravel, soil, grass, concrete and blacktop.
• Use to mark athletic fields, landscaping, work sites and more.
• Includes a no-mess spray-through cap to allow upside-down use.
• Appearance: Flat to semi-gloss finish (dependent on surface porosity).

Application:

Use when temperature is above 40°F (4°C) and humidity is below 85% to ensure proper drying. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after mixing ball is heard. Invert can and point at ground or floor. Hold can 4 to 10 inches above surface to be marked. Press in sideways to spray or use Rust-Oleum Marking Wand (#2393000) or Rust-Oleum Marking Pistol (#210188). Follow directions for proper use of this equipment. Keep can moving to prevent build-up. Clean valve by spraying upright for 2-3 seconds after each use. If valve clogs, carefully remove spray tip and clean in thinner. Do not insert any object into can valve opening.

Physical Properties:

• Resin Type: Vinyl Toluene Modified Alkyd
• Fill Weight: 15 oz. (426 g)
• Volatile Organic Compounds: <65% (Complies with VOC Regulations in California)
• Practical Coverage at Recommended DFT (assumes 15% material loss): 300-350 linear feet (91-106 m) at 1.5" wide (3.8 cm) (dependent on surface porosity)
• Dry Times at 70°F (21°C) and 50% Relative Humidity: Tack-free (<5 minutes)
• Dry Heat Resistance: 200°F (93°C)
• Shelf Life: 5 years
• Flash Point: Below 0°F (-18°C)
• Contains: Acetone, Xylene and Toluene; Lead-free