Seco-Larm EB-P501-02HQ 4-in-1 HD Video Balun with Pass-Through, Pack of 10

★★★★★ 4.2 145 Bewertungen
€45.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe
Verkauft und versendet von firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€45.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe
Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 10.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar
Verkauft und versendet von firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 205063256 Erscheinungsdatum 2025/10/16 Listenpreis €45.00 Modellnummer 205063256
Kategorie
  1. Video Surveillance
  2. CCTV Accessories

The fast, easy, and low-cost way to connect a CCTV camera to a monitor, multiplexer, or video recorder. The EB-P501-02HQ video balun allows the video signal of a single CCTV camera to be transmitted long distances over low-cost CAT2 to CAT6 unshielded twisted pair (UTP) cable. Great for both full-motion color and full-motion monochrome cameras, this balun increases the flexibility of where such cameras can be mounted. This CCTV balun also works over existing UTP cabling, making it perfect for use in nearly any building or across an entire campus. The EB-P501-02HQ’s patented design features built-in terminals for power OR data pass-through.

  • 4-in-1 TVI / CVI / AHD / Analog video up to 4K/8MP
  • Transmits up to 1,312ft (400m) depending on format, resolution, and cable used
  • PAL / NTSC / SECAM compatible
  • Passive operation – No power required
  • Lifetime limited warranty
  • Built-in ESD, EFT, and transient protection
  • High immunity from interference
  • Uses low-cost Cat5e/6 cable instead of costly coaxial cable
  • Screw terminals for easy installation
  • Small size allows mounting of multiple baluns behind a DVR
  • Pack of 10

 

Specifications

Range TVI- 1080p: 492ft (150m), 4K/8MP: 656ft (200m) CVI- 1080p: 820ft (250m), 4K/8MP: 820ft (250m) AHD- 1080p: 656ft (200m), 4K/8MP: 820ft (250m) Analog- 1,312ft (400m)
Video Format PAL, NTSC, SECAM
Maximum Input 1Vp-p
Insertion loss [email protected]~100Mhz max. Return loss
Return loss [email protected]~51Mhz max.
Frequency response 300kHz~100MHz
Common mode rejection 65dB min.
Wire type UTP (Unshielded Twisted Pair) 24~16 AWG
Wire category Cat2 min.
Attenuation 1.5dB max.
Impedance Coax, make BNC- 75Ω@1MHz Terminal block- 100Ω@1MHz
ESD Protection 30kV (Air), 15kV (Contact), IEC 61000-4-2 compliant
EFT Protection 40A (5/50ns), IEC 61000-4-4 compliant
Lighting protection 2A (8/20μs), IEC 61000-4-5 compliant
DC loop resistance 52Ω/1000’ (18Ω/100m)
Differential capacitance 19pF/ft max. (62pF/m max.)
Power No power required
Maximum Amperage 2A@12VDC, 2A@24VDC
Maximum pass-through voltage 24 VAC/VDC
Operating temperature 32°~131° F (0°~55° C)
Storage temperature -4°~185° F (-20°~85° C)
Humidity range 0~95% (Non-condensing)
Case ABS Plastic
Weight 0.6-oz. (18g)
Dimensions 1-15/16″x9/16″x7/8″ (49x14x22 mm)

 

Troubleshooting

Wavy or ghost image if connected to image processor (e.g., multiplexer or DVR), but not if directly to monitor
  • Move the Cat5e/6 cable away from possible sources of interference.
  • Ensure that the same twisted pair connects to a balun at both ends of the
    cable.
  • Replace the cable with a new Cat5e/6 cable.
Image background flutters between dark and light
  • Remove a local power source, or adjust the monitor’s brightness and
    contrast
Image is wavy and shakes
  • Try reversing polarity of the two wires at one end of the Cat5e/6 cable.
Image is weak or faded
  • Reduce the Cat5e/6 cable length.
  • Replace with a higher-grade cable. Cat5e cable meets the specifications
    in the manual. Cat6 cable allows longer range.
No image
  • Double-check that the Cat5e/6 and BNC cables are connected properly.
  • Run a continuity test on all wires in the cable.
  • Check that the camera and monitor are powered up.

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.2 von 5
★★★★★
145 Bewertungen | 59 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
78% (113)
4 Sterne
6% (9)
3 Sterne
3% (4)
2 Sterne
2% (3)
1 Stern
11% (16)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.