Skat Blast USA-180-DC Insider II HEPA Dust Collector for Blast Cabinets, Made in USA

USA-180-DC INSIDER II - Removes dust for all-day cabinet blasting! Recommended for improved visibility within Skat Blast Cabinets up to 5 ft wide. (Smaller cabinets work best with Vac-55 Vacuum System.) Skat Blast Dust Collector with patented HEPA Filtration traps ultra-fine dust particles down to 0.3 microns and keeps 99.97% dust inside the dust collector and out of your shop. Non-stick HEPA Filter Membrane resists clogging. Most dust simply falls off the filters.Model USA-180-DC has Triple Bank HEPA Filtration. The result is 40% more airflow through the cabinet and dust collector, and increased visibility and dust collection over older bag-style units. Plus, 125% larger filtering area!Here's how it works: dust-laden air enters back of the dust collector through a 5" diameter, 6 ft long hose (included) and settles on the outside of the HEPA Filter Cartridges. Cartridges are easily accessible through the front door. Shaker lever assembly, located on the rear of the unit, operates manually to shake dust and dirt off the filter cartridges. Dust falls down to the bottom drawer. To empty, simply open and remove drawer and discard residue. Fast and easy!Large 10"w x 28"h hinged front door makes filter cartridge changes and inspection fast and easy. 1/3 HP, 3450 RPM Baldor, 115 volt motor and 8-3/4" diameter blower wheel pull 300-350 cfm. Includes (3) 8-1/4"H x 7-1/4" dia HEPA Filter Cartridges, manual shaker assembly, clean-out drawer (10-1/2"w, 12-1/2"d, 4"h with gasket), 6' long x 5" dia hose, and 4" rear outlet. Made in USA.WARNING: Do not use Dust Collector System as a wet vac. Electrical shock and serious injury could result. Dust Collector filters are guaranteed for 90 days against mfg defects. Dust Collector motors are guaranteed for 1 year. Collectors are not for collecting wood shavings or sawdust.Specs:Size: 16" wide, 15" deep, 56" highConstruction: 20 gauge steelShip Wt: 159 Lbs (Motor Freight)Volts: 115 volts, 6 ampMotor: 1/3 HP, 3450 RPM Baldor, continuous-dutyBlower: 8-3/4" dia, 300-350 CFMOpening: 10"w, 28"h - Hinged front doorFilter Cartridge: 3 washable, air-dry type HEPA. 8-1/4"h, 7-1/4" diaDrawer: 10-1/2" wide, 4" high, 12-1/2" deepDC Hose: 5" diameter, 6 ft longOutlet, Rear: 4", fits 4" stove pipeShaker: ManualDecibels: 70 front, 74 rear

• Commercial-Grade Made-in-USA Dust Collector increases visibility while abrasive blasting - pulls 300-350 CFM
• Removes dust for all-day cabinet blasting! Recommended for improved visibility within Skat Blast Cabinets up to 5 ft wide. Smaller cabinets work best with our Vac-55 Vacuum System.
• PATENTED HEPA FILTRATION traps ultra-fine dust particles down to 0.3 microns and keeps 99.97% dust inside the dust collector and out of your shop.
• TRIPLE BANK HEPA FILTRATION (3 filters) has 125% more filtering area than old-style bags used on our older bag-style units. The result is 40% more airflow through the cabinet and dust collector, increasing visibility and dust collection.
• NON-STICK FILTER MEMBRANE - resists clogging. Most dust simply falls off filters. To clean, shut unit off, shake down filters with lever on rear of unit, then empty drawer.