Stud Finder Wall Scanner Multifunction Wall Detector with Lar Area Sensor Metal Detector Handheld Stud Finder Wall Scanner Wire Detector The Most Accurate and Higher Safety (Wd10)

Specifications Depth ran Magnetic metal : 8cm Non-magnetic metal : 5cm AC Cable:5cm Wood : 2cm Units CM/in Non-metal detection Metal detection Auto shut off 300s Auto backlight shut off 10s Protection class IP65 Battery type 3xAAA(not include) Working hours 7.5h

• Automatic material differentiation, precise positioning of various metals/woods/wires to make the decoration drilling works more efficiency, more safer
• In non-metal detection mode, the device must be closely touching the measured surface. It requires recalibration if the device lifted during operation. Press the non-metal measure button to recalibration.
• In metal detection mode,the device will read the depth in best accuracy when the measured object is a Rebar with a diameter of 20mm,otherwise, the value only for your reference.
• Under all detection modes, a warning will be trigred when a wire is detected.
• The detection result is affected by the material of the detected object,the size of the object, and the material and state of the detection surface.