Tobacco Cutting Machine TC-100 for Cutting Tobacco Leaves or Herbs Cutting Width 0.8 mm

This tobacco cutter is essential for all smokers who want to make tobacco themselves, as it is ideal for processing leaves or herbs. The excellent workmanship and the high-quality material guarantee a long service life. Only the cutting combs located under the rollers need to be replaced when worn out. However, with proper use, you can process about 50 kilograms of tobacco leaves before the cutting combs have to be changed.Before starting the machine for the first time, please check all the screws on the cutting combs for their firm fit. The device foot must also hold the cutter securely. If all elements are well connected, you can start cutting. The leaves are cut to a width of 0.8 millimeters, so you can produce a really fine cut.Work carefully and pay attention not to put your fingers between the cutting rolls. In no case should the cutter be accessible to children.WARNING: NEVER turn the crank backwards if there is material in the machine, as this will bend teeth and break the scraper combs. NEVER put more than one layer of leaves into the cutter as this may cause damageNote that the nuts and bolts holding the scraper combs have to be tightened regularly.In case of blockage:Do not turn the crank backwards.Sprinkle a few drops of hot water on the cutting rollers to loosen stuck material Clean out the material using a brush.Readjust the scraper combs by loosening the bolts, pushing the combs into the rolls as far as possible and then tightening the bolts againMaintenance:To make your machine last longer, prevent high tension on the crank by decreasing the amount of material that is being fed into the machine at a time.For lubrication apply a few drops of gear lubricant on the moving parts.

• Cutting Roll length: 100mm; Cutting width: 0.8mm(±0.3mm); weight: 1.7kg (approx. 4lbs)
• Made of high-quality steel with stainless steel scraper combs and sealed ball bearings
• WARNING: Do not turn the crank backwards as this will damage the scraper combs and disable the machine from running smoothly
• Very solid stand when screwed to a worktop using the 4 predrilled holes
• Please remove the stems from the leaves before cutting