Toshiba Lighting Tech TFNCB13E6-162MPA Power Distribution Board for Small Residential with N Series Door and Functions

Helps prevent electric fire from earthquakes. When it senses an earthquake equivalent to a 5 earthquake degree, the main core breaker will automatically shut off after 3 minutes of the power lamp flashing and buzzer ringing. When a power outage occurs between 3 minutes after an earthquake wave detection, the main circuit breaker will automatically shut off when the power is restored. When the earthquake waves are detected within 8 seconds after a power outage, the main circuit breaker will automatically shut off when the power is restored. Press the reset button between the earthquake detection and the main core breaker automatically shut-off and the flashing buzzer of the power lamp will stop and return to its original state. Short press the test button (within 2 seconds) to automatically shut off the main core breaker after 3 minutes. Long press and hold the test button (more than 2 seconds) will immediately shut off the main core breaker. The secondary side wiring of the thin branch breaker (20A or less) is made with a fast connection terminal structure, so it is only for single wire with φ0.06 and φ0.08 inch (1.6 mm) and φ0.08 inch (2.0 mm). When using a stranded line or 2.6 diameter single wire, please use the special rod crimping terminal (sold separately). Limiter wire is included with the product.

• Rated Current: 60A (mother-wire size 0.6 inch (14 mm2) / Cabinet specifications
• Mounting angle: Within ±5 degrees between the left and right sides
• Format: Exposure, Semi-Embedded Type/Color: White
• Number of branch circuits + spare space: 16+2
• Core Capacity: 60A
• 2E Circuit : 4
• Board Rating: 60A (75A)
• Specifications: With limiter space; Inward directions in Hokkaido, Tohoku, Tokyo, Chubu, Hokuriku, and Kyushu power pipes
• Type: MGP3A, Rated Voltage: AC 100V, 50/60Hz
• Operating sensitivity: equal to a 5 earthquake intensity of the 5, works at 250 gal cycle 0.3s, 0.5s, 0.7s, and not working with 80 gal cycle 0.3s, 0.5s, 0.7s and 250 gal cycles