Water-based pore filler, for protecting and preparing wood before painting. (750 ml, transparent)

For protecting and preparing the wood before painting. Transparent water base, seals pores and regulates the absorbency of the wood. Quick drying and easy sanding. Suitable for sealing furniture, cabinets, doors and all types of indoor woods. Does not change the colour of the wood. Cleaning water dilution can be used immediately if 5% is required, depending on the type and condition of the base, dry at approx. 1-2 hours, 3-6 hours, indoor use, application of brush, short hair roller, gun. Instructions for use: 1. Preparation of new wood: the wood must be dry and free from dust, grease and other impurities, with a moisture content of no more than 18-20%. Sand the wood towards the grain to open the pores. Homogenise the product before and during use. Apply a layer of tapperos to the water. After approx. 3 hours sand the wood, if there are any unevenness, apply a second coat. 2. Weathered woods - Remove varnish or glaze with wood stain or sand wood and use like new wood. 3. At 5 to 35 °C at low temperatures, drying is delayed. 4. Do not use in high temperatures or strong sun rays. 5. We recommend that you do not store the product for more than 12 months in the well-sealed and sealed original packaging, at temperatures between 5 and 35 °C.

• For protecting and preparing the wood before painting. Transparent water base, seals pores and regulates the absorption of the wood. Quick drying and easy to sand. Suitable for sealing furniture, cabinets, doors and all types of wood indoors. Does not change the colour of the wood.
• Cleaning water dilution ready to use at 5% dilution performance 8-10 m2/l depending on the type and condition of the wearer, touch drying approx. 1-2h repainting 3-6h indoor use application brush, short hair roller, gun.
• Application mode 1. New wood preparation: the wood must be dry and free from dust, grease and other impurities, with a moisture content of no more than 18-20%. Sand the wood towards the grain to open pores. Homogenize the product before and during use. Apply a layer of top coat to the water. After approx. 3 hours sand the wood, if unevenness occurs, apply a second coat.
• Weathered wood: peel or glaze with wood stain or sand the wood and use like new wood. 3. Use at 5 to 35 °C, at low temperatures, drying is delayed. 4. Do not use the product at high temperatures and not on surfaces exposed to strong sunlight.
• 5. We recommend that you do not store the product for more than 12 months in the well-sealed original packaging and protected from the elements at temperatures between 5-35 °C.