Waterslide Inkjet Paper Clear 8.5" x 11" 20 Sheets*

With Waterslide Decal Paper you can print any designs using an inkjet printer and transfer them onto any non-porous surfaces. The decal transfer is very thin and barely noticeable when transferred onto a surface. The decal also adheres strongly and you can hand wash the decaled items. Our Waterslide decal paper is very quick and easy to use, any beginners can use them without any failure. Glass, metal, ceramic ware (for decorative purposes), wood, furniture, candles, soap, model airplanes, model railroads, die-cast cars, fishing rods, picture frames, book covers, albums and appliances are just some examples of where inkjet Waterslide Decals may be applied.

• Waterslide Inkjet Paper Clear 20 Sheets *****Clear acrylic spray is required for this paper***.HOW IT WORKS Clear Waterslide Decal Paper You will need: Hair Dryer, Ruler, Scissors, Tissues/Towel STEP 1: Edit the size and shape of your image. STEP 2: Print the image on the glossy coated side of the paper.
• STEP 2: Print the image on the glossy coated side of the paper.STEP 3: Next, cut out the image with a pair of scissors or a craft knife. *If you are using the white paper, cut out very carefully around the image, if you leave any border around the image they will appear later. *If you are using the clear paper, you can leave a small boarder around the image since it's clear, you won't be able to see it.
• STEP 4: Once the decal has been cut out, place the decal into a bowl of water leave for up to 30 seconds. *In cold weather use warm water. *Before you place the decal onto your project, wet the surface of your project with water. This will allow you to move the image easily so you can position it in the right place.
• STEP 5: If you have soaked the decal for long enough, you will be able o feel the backing paper and decal transfer easily slipping. (Do not remove at this stage) Take the decal out of the water and place it facing up onto your project. Then carefully slip the decal paper slightly and attach the lip of the decal on the surface.
• STEP 6: Then gently pull the backing of the paper away leaving the decal transfer to stick to the surface while supporting the decal at the same time with your other hand. STEP 7: Once the decal has been attached to the surface, move it around to the desired position. Once you have positioned the decal, use a rubber scraper to remove any water or air bubbles underneath the decal transfer.