waveshare 1.27inch RGB OLED Display Module 128×96 Resolution Screen, 262K RGB Colors SPI Interface 3.3V / 5V Operating Voltage, for Ardu/Raspberry Pi/STM32

★★★★★ 4.6 65 Bewertungen

€9.64
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€9.64
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 24.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 216993505 Erscheinungsdatum 2026/04/19 Listenpreis €9.64 Modellnummer 216993505
Kategorie

1.27inch RGB OLED Display Module 128×96 Resolution Screen. Embedded SSD1351 driver chip, SPI Communication Features 128×96 resolution OLED display, 262K colors, clear and colorful displaying effect SPI interface, minimizes required IO pins Comes with online development resources (examples for Raspberry Pi/Arduino/STM32) Specifications Operating voltage: 3.3V / 5V Resolution: 128 × 96 pixels Communication Interface: 3/4-wire SPI Driver : SSD1351 DISPLAY PANEL: OLED Display size: 25.708 × 19.28mm PIXEL SIZE: 0.047 × 0.185mm Module size: 42.2 × 29.0mm OLED and its controller The built-in driver used by this OLED is SSD1351, which is a 128RGB * 128 Dot Matrix OLED/PLED controller with a 128*128*18bit SRAM as a display buffer area, which supports two color depths of 262k and 65k. And supports 8bit 8080 parallel, 8bit 6800 parallel, 3wire-SPI and 4wire-SPI and other communication methods. This module selects 4wire-SPI and 3wire-SPI as the communication method, which reduces the area of the module and saves the IO resources of the controller. Pinout RES : Reset, low active DC: Data/Command selection (high for data, low for command) CS : Chip selection, low active CLK : Clock input DIN: Data input GND : Ground VCC: Power (3.3V / 5V input) How-to-use document/User Manual://bit.ly/43rUx9F Package Content 1.27inch RGB OLED Module x1 GH1.25 7PIN cable x1

  • 128×96 resolution OLED display, 262K colors, clear and colorful displaying effect
  • SPI interface, 4-wire SPI, 3-wire SPI, minimizes required IO pins
  • Operating voltage: 3.3V / 5V. Embedded SSD1351 driver chip.
  • Resolution: 128(H)RGB x 96(V). Dimension: 25.708 × 19.28mm.
  • Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
Brand waveshare
Color 1.27inch RGB OLED
Voltage 5 Volts (DC)
Model Name 1.27inch RGB OLED Display Module
Resolution 128(H)RGB x 96(V)
Pixel Pitch 0.0975
Screen Size 1.25 Inches
Aspect Ratio 4:3
Display Type OLED
Manufacturer Waveshare
Model Number 1.27inch RGB OLED Display Module
Mounting Type Wall Mount
Screen Finish Glossy
Contrast Ratio High
Processor Count 1
Has Color Screen Yes
Native Resolution 128 x 96
Compatible Devices Arduino, Raspberry Pi, STM32
Display Technology OLED
Hardware Connectivity PC Card
Connectivity Technology HDMI
Display Resolution Maximum 128 x 96

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.6 von 5
★★★★★
65 Bewertungen | 27 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
84% (55)
4 Sterne
3% (2)
3 Sterne
2% (1)
2 Sterne
1% (1)
1 Stern
10% (7)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.